Additional Performance Options for the TRX450 04-05
|
| Note: Not all parts listed wrork with every kit in every application. We will recommend combinations to work with your specific application. Please call with any questions. |
| Cylinder Head Porting |
$425.00 |
Your 4-valve head, ported to application and bore/stroke. 5 angle seat grind and seals. |
| Cylinder head porting +2 Stainless exhaust valves |
$894.00 |
Fixes exhaust port design. Porting for application, 5 angle valve grind, exhust springs with Ti retainers, light weight rocker, seals. |
| Cylinder head porting with Stainless valves +1 intake and +2 exhaust. |
$1,111.00 |
Ported to application, 5 angle grind, Stainless +1In and +2 Exh, Spring Kit, Ti retainers, light weight Rocker, new seals |
| Cylinder Head porting with +1 Titanuim Exhaust Valves |
$1,502.00 |
Good all around set up - Ported to application, 5 angle grind, +1 Ti Exh, Spring Kit, Ti retainers, Light weight Rocker, new seals, exh seats |
| Cylinder head porting with +1 Ti intake valves and +2 Ti exhaust valves |
$1,952.00 |
This head is sick - Ported to application, 5 angle grind, +1 Ti In and +2 TI Exh, Spring Kit, Ti retainers, Light weight Rocker, new seals, exh seats |
| Hot Cam Stage 2 |
$189.95 |
Little Better than HRC Cam - good for low compression and mild engines. |
| Hot Cam Stage 3 |
$189.95 |
Good bottom and Midrange - As big as you can go w/o springs and guide work. |
| Web Camshaft - Stage 1 |
$240.00 |
Requires spring Kit and valve guides to be cut down. This is our favorite for MX and Offroad. Needs high compression. |
| Web Camshaft - Stage 2 |
$240.00 |
Requires spring Kit and valve guides to be cut down. This is our favorite for Drag racing and high rev applications. Needs High Compression. |
| Adjustable cam gear |
$40.00 |
Recommended for serious builds to insure proper cam degree. |
| Shim Kit |
$89.95 |
3 shims each size, 1.2mm-3.5mm in .05mm increments |
| Degree Camshafts (SOHC) |
$150.00 |
Set cams lobe center to spec - labor only |
| Intake Kit Foam Filter |
$111.95 |
Billet intake ring with 2 stage foam filter |
| Intake Kit K&N |
$154.95 |
Billet intake ring with K&N filter (asphalt only) |
| Exhaust System - Rossier |
$450.00 |
Stainless System with aluminum silencer |
| Spark Arrestor |
$75.85 |
Supertrapp style end cap. |
| 41mm FCR Carb |
$698.00 |
TPS and Hot Start - More power everywhere |
| 44mm Lectron Kit |
$585.00 |
Drag Race Only - 522cc w/ big compression |
| Programmable Ignition |
$350.00 |
Allows engine to pull longer on the top. |
| Hinson Clutch Assy |
$473.95 |
Excellent set-up for MX and Offroad |
| Hinson Clutch Basket |
$230.00 |
Does not come in assembly. |
| Lock-up clutch |
$320.00 |
Recommended for Drag Race Only |
| Install Big Bore Kit |
$250.00 |
Labor to install and blueprint top end kit - valve adj inc. |
| Install Stroker Kit |
$475.00 |
Labor to install and blueprint stroker kit |
Cylinder Kit
