 |
|
MAX POWER INC.
Master Price List
Reconditioning
and Performance Services
The normal processing time on engine work varies with the season. You're encouraged to call for an appointment if you have an urgent rush. We try to accommodate our customers and we offer 1-Day UPS service. Prices do not include shipping. We do not accept responsibility for worn or damaged locator pins.
| CYLINDER
REPLATING - 2 & 4 STROKE |
| Our
cylinder replating service involves the chemical stripping of the old worn out plating. The Bore is then
recoated with Apticote 2000 ceramic followed by diamond honing, port chamfering,
and gasket surfacing. Rush
order turnround (by appointment only) add $75.00 |
| Strip,
Plate and Diamond Hone |
$225 |
| Skim Bore (85% of cylinders need this) |
$35 additional |
| Welding Repairs (Anything you can catch a fingernail on) |
$75 additional (May be more with severe damage) |
|
|
| All cylinders with the exception of complete overbore kits, MUST have all parts and gaskets removed. An additional charge will be assessed if Max Power needs to remove parts or gaskets. |
| Stud
removal |
$35.00 flat fee |
| Powervalve removal and installation (Includes Studs) |
$85.00 |
| Powervalve
removal only |
$35.00 |
| Dowel
pin removal |
$5.00 --not responsible for replacing damged dowels. |
| Broken
stud/bolt removal |
$50.00 per stud/bolt |
| Gasket
removal |
$15.00
per cylinder |
| Please be courteous and take a moment to clean the cylinder of excess oil and dirt. If deemed excessively dirty an additional charge of $20.00 will be assessed. |
|
|
| WISECO
PISTON KITS |
| Max Power carries Wiseco pro-lite piston kits for all makes and models. Most piston kits include the piston, ring, clips and pin. We also have a full inventory of top end gasket kits for your make and model. Please call for price and availability. |
|
|
| BIG
BORE KITS |
| For
detailed information on Big Bore Kit prices please see
our big bore kit pages |
|
|
| WISECO
BIG BORE PISTON KITS |
| Max Power carries one of the largest inventories of special big bore pistons. Please call for availabilities and price. |
|
|
| CYLINDER
PERFORMANCE AND REPAIR SERVICES |
| Porting
with Cylinder Repair only |
$250.00 |
| Exhaust
valve service |
$85.00 (Remove, clean, inspect, and install) |
| RUSH
ORDER (By appointment only) additional per cylinder |
$75.00 prices vary with seasonal demand. |
| Diamond
hone plated bores |
$50.00 |
| Heli-coil
stud holes |
$85.00 |
| Deck base or head gasket surface |
$75.00 |
| Bore
/ Hone steel sleeve |
$125.00 |
| Overbore Aluminum - Replating additional |
$75.00 |
| Welding Repairs - Detonation Damage |
$110.00 May Increase with severe damage. |
|
|
| MORE
PERFORMANCE COATING SERVICES |
| Details
are available on request. |
| PISTON
COATINGS (SKIRTS AND CROWNS) |
$45.00 Additional if we provide piston.
$50.00 Additional if we coat your piston. |
| HEAD
COATING (SINGLE) |
$60.00 |
|
|
|
| HOW
TO SEND YOUR ENGINE PARTS FOR SERVICE
This is the procedure for packaging
and shipping your engine parts for mail-order service;
| |
|
| 1. |
Find a strong cardboard
box. Select a box that allows 4 inches of space around the engine part. |
| 2a. |
When sending in your cylinder for an overbore kit, please leave the head and power valve assembly intact, that way there are no lost parts or moveable parts that can damage your cylinder in shipping. |
| 2b. |
For cylinder plating repair ONLY, please remove all spare parts. Send your power valves in a seperate bag so we can check for plating flashing in the power valve ports. Make sure they are well labelled or attached to the cylinder. |
| 3. |
The best packing material is 'bubble wrap'. Take care to pack around the fragile parts of engine parts like the bottom skirt of the cylinder, the head's water fittings, or the crankshaft's threaded ends. |
| 4. |
Enclose ORDER FORM. Print
a Service/Repair or Big
Bore Kit order form from your browser. |
| 5. |
Regarding payment, you can pre-pay with a personal check. You can also have your parts returned shipped by UPS COD Money Order OK, or by Visa/MasterCard. |
| 6. |
It's best to send your parts by UPS. Remember to insure the parts for at least $500 (about $4) and get the UPS tracking number. If there is any problem, We can track your package through UPS's
Internet site. |
| 7. |
Send engine parts to:
Max Power Inc. 3001 Progress Rd. Madison, WI. 53716 |
|
|
|
